Xylem System 5000 User Manual - Manual (Page 115)

113
System Setup - Inputs & Outputs
Inputs & Outputs Screen
The Inputs & Outputs screen is the third of
three System Setup screens and provides
access to IO settings relating to Tasks
and their setup within the System 5000
™
.
Available categories include Basic Program
Management, Log File Configuration,
Tasks Overview, and View Status Screen.
Some sections may be familiar as portions
of these screens are fully accessible
through various menus and screens within
the System 5000
™
.
Each of the above areas are described in
more detail throughout this chapter. The
other System Setup screens, General Setup
and Communications, can be accessed by
pressing their associated tabs.
Basic Program Management
Once a Basic program has been installed,
as detailed in Chapter 7, it can be
viewed, edited, debugged, exported,
or uninstalled from the Basic Program
Management screen. In general, most
programs will not need much, if any,
editing performed. However fine tuning as
well as troubleshooting can be performed
to aide and ease the use of Basic programs
on the System 5000
™
.
Installed Basic programs are displayed
in the left box with their associated Type,
Program Name and Filename. The Type
can have up to three letters displayed, I, O,
and N, relating to where the program will be available: Input, Output, and Network respectively.
Program Options
Selected programs can have program options edited, the program itself debugged (or viewed via
the function button), the original program exported, or uninstalled if no longer needed. Exported
programs will appear as files on the Local system within the Data File Manager. Uninstalled
programs will simply be removed from the system.