Xylem System 5000 User Manual - Manual (Page 107)

105
System Setup - Communications
Communications Screen
The Communications screen is the
second of three System Setup screens
and provides access to communication
settings including GOES, Ethernet, and
SDI-12 within the System 5000
™
. Available
categories include GOES Configuration,
Network Listening Ports, Network
Setup, Remote Assistance, and SDI-12
Transparent Mode. Some sections may be
familiar as portions of these screens are
fully accessible through various menus
and screens within the System 5000
™
.
Each of the above areas are described in
more detail throughout this chapter. The
other System Setup screens, General Setup and Inputs & Outputs, can be accessed by pressing their
associated tabs.
Direct PC Connect
The Direct PC Connect screen enables the
System 5000
™
to be quickly set up and
made ready to connect to a computer or
laptop. For detailed instructions on how to
connect a computer to the System 5000
™
,
please refer to Chapter 13, Connecting
with a PC.
GOES Configuration
The GOES Configuration screen allows
the general status and operations of an
attached GOES Radio to be seen and
configured. The GOES Radio must be
properly set up and operational before
any transmissions will occur. As the GOES
Configuration screen and all sections within are detailed in Chapter 6, please refer to the GOES
Output for more information on setting up, operating, and maintaining the GOES Radio.