GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 58)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 58
Configure Millennium II Controller
Figure 79 Front Panel - Millennium II Controller
Table 10 Push Buttons - Millennium II
Button Function Action
▲
▼
Display Contrast Increase or decrease the display contrast (in Main Display).
Parameter Change Increase or decrease the value of the selected parameter.
▲
◄ ►
▼
Navigate Navigate menus – move to different selected menu item.
Enter Enter Enter a sub-menu or confirms a parameter change.
ESC Escape Go up one menu level or exits a parameter change without saving.
Menu Menu Go to the Main Menu.
Help Help Display available Help information.
The Millennium II controller’s primary user interface is the front panel, which includes a backlit LCD, and an array of
pushbutton controls. SW202-8 must be set to ENABLED for changes to be made from the front panel. This section
covers the basic operations that must be performed so that the controller is minimally configured.
Step Configuration Attribute
to Change
Menu Path/Action = Millennium II
1
DATE/TIME
Date and Time
Number of Alarms
and Warnings
Plant Voltage and Load
Current
Voltage Test Jacks
RS-232 and Ethernet Ports
for PC Web Pages
Plant Mode Menu Navigation Plant Status LEDs