GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 21)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 21
Install PV/AC Partition Kit – NE-M Eco systems only
This section applies only to NE-M Eco systems
NE-M
Eco systems power some rectifiers from PV (photo voltaic or solar array) and others from ac, typically a generator.
Each terminal block powering rectifiers can be connected to either PV or ac, but not both.
The PV/AC Partition Kit (150028727) divides the Input panel into separate input sections for PV and AC fed terminal
blocks.
The position of the partition is site specific. Follow all site engineering instructions. This position indicated in this section
is only an example.
Figure 20 Eco Input Panel
CAUTION: Personal injury and Equipment Damage
PV Disconnect Panel with disconnects rated at 300Vdc on each PV conductor is required for use
with Solar Arrays (PV sources).
Step Action
1 Remove the Input Panel cover (4 captive screws).
Figure 21 Input Panel Screws