GE Industrial Solutions H5692448 Power Systems Infinity M1 (NE-M) - Manual (Page 43)

NE-M Installation Guide H5692448
CC848815325 r06 May 2013 43
Step Action – Pulsar Plus
1
Analog Interface Connector
Connect and wire to shunt and alarms.
J1 is a 6-pin connector provided for analog interface to a plant shunt, distribution alarms, and open battery
string alarms. Typically a factory installed plant wire harness plugs into this connector. This wire set has a
purple wire with a Faston ® receptacle for connecting the Open String Alarm from field installed battery
disconnect breakers.
Table 4 Analog Interface Connector Signals – Pulsar Plus
Pin Signal
1 Shunt+
2 Shunt Reference
3 Shunt-
4 Fuse Alarm Major +24V
5 Open String
6 Fuse Alarm Major -48V
2
1-Wire Peripheral Connector
Connect and wire to VT-Probe, external ambient probe, or Remote Voltage Monitor.
J2 is an RJ-45 receptacle for connecting to 1-Wire devices.