EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 64)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
55
F9:Connect
This option calls the CONNECT window. This window allows the operator to
connect to the clips and record trains of other machine on the network.
The following functions can be used in the CONNECT window:
ALT+L: return to LOCAL mode and close the CONNECT window
ALT+C: CLIPS mode - to connect to the clips of a remote machine
ALT+R: RECORD mode - to connect to the record trains of a remote machine
ALT+P: CLIP+REC mode - to connect to the clips and record trains of a remote
machine.
After selecting CLIP, RECORD or CLIP+REC mode either with the keyboard or by
clicking with the stylus, select the machine you want to connect to: click on it with
the stylus, or move with the arrow keys and press ENTER on the keyboard.