EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 194)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
185
Unprotected clip
(or non-protected clip) Clips that users can manually delete via a Delete
action. These clips are however write-protected:
they will never be automatically deleted by the
record train.
VITC Vertical interval timecode (VITC) is a timing
signal that is part of a video recording. It is
recorded in the vertical blanking intervals
between successive picture frames, hence the
"vertical interval."
VITC table Timecode jump table in which the user defined
timecode type is stored. This will usually be the
VITC in SD and HANC VITC in HD but could be
another timecode type.