EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 135)

Issue
10.03.C EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2010
126
5. Enter a value with the F_ keys including leading zeros
(0+2+1+2= 2:12), OR move the lever and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next to
play in a playlist.
Edit Point (V BASE)
Audio is extended from the end of the previous clip and the audio on the clip being
edited is shortened.
H
OW TO
P
ERFORM AN
A
UDIO
A
DVANCE
In this case, the audio transition will be advanced compared to the video
transition.
The Start on Cut and End on Cut are not taken into account in these editing
actions.
1. Enter the Playlist Edit mode.
2. Browse to the desired clip in the playlist.
3. Press to highlight V Base (SHIFT+A).
4. Press to highlight A Advance (A).
5. Enter a value on the F_ keys including leading zeros (0+2+1+2= 2:12), OR
move the lever and press ENTER.
The value entered will be present on the PRV SCREEN when the clip is next to
play in a playlist.
Edit Point (V BASE)
Audio is shortened on the previous clip and the beginning of the clip being edited
is extended.
Note
When editing a playlist in V BASE or A Base, the video transition
information will be on the top line of the OSD display, whereas the audio
transition information will be on the bottom line of the OSD display.