EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 169)

Issue
10.03.C EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2010
160
edit on the top of the screen, then select the U-V and Y values by moving the pen
on the right location of each selection area. When the adjustment is made, move
the pen to an empty zone of the screen.
The CLEAR function is also available from the Remote Panel (SHIFT + B) No
confirmation is required.
Keyer (K)
Can be selected with the pen, click on K (arrows appear/disappear) on the Paint
Mode monitor display, or press SHIFT + A on the Remote Panel menu. This
feature will cause the drawing to dissolve on and off using the dissolve duration
defined in the Setup menu (Page 1, F6)
Library (L)
Selecting L allows entering into a library where the user can load or save entire
drawings and logos.