EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 192)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
183
E2E mode on its default record train. If the default record channel associated to
that player is currently stopped, it will jump to the last recorded picture and
pause.
EJECT: if the play channel is not yet in E2E mode when the command is sent, it
will return to E2E mode on its default record train (similar to receiving a REC
command). If the play channel is already in E2E mode, it will switch to the next
record channel available (AÆBÆCÆ…ÆAÆ…). This is for example useful with a
BVE edit controller to allow the editor to select the record train he wants to work
with.
Louth VDCP protocol
This protocol is a more complex protocol mainly used by automation systems but
also by Sony switchers. It is not based on the Sony BVW75, and can handle clips
as well as playlists.
IPDP Protocol
For more information on how the IP Director application controls the server, refer
to the IP Director Technical Reference manual and User manual.