EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 62)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
53
9.3.2 T
HE
T
ITLE
B
AR
The Title bar contains the status information:
• Number and name of the server currently selected for clips and for record trains
(*). The name is blinking red if it is a network machine.
• Total number of clips (i.e. protects, 1 camera angle counting for 1 clip in this
count)
• Total duration of all clips
• Remaining capacity on the server (all record trains together; valid for local
server only)
Note
The abbreviated word “(Loc.)” appears next to the name if the local
machine is currently selected for clips and/or for record trains. The clips
displayed in the clip screen belong to this machine.
9.3.3 T
HE
F
UNCTION
B
AR
The second line displays the available functions. Each function can be called by
the corresponding F_ key of the keyboard, or by clicking with stylus & tablet on
the corresponding area on this line.
F1: Name
This function is used to name a clip. For more information on how to name a clip
in the VGA, refer to the section 9.3.8 ‘How to Name a Clip’, on page 59.
F2: Clip/Cam
This function toggles between CLIP mode and CAM mode.
• In CLIP mode, actions on a clip will use all available cameras for this clip.
• In CAM mode, actions on a clip will only use the selected camera for this clip.
Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this
mode selection.
F3: Call
The operator can gain immediate access to a local or network clip by typing its ID
number.
F4: Pref