EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 21)

Issue
10.03.C EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2010
12
Function Key Use
F9: Fill Playlist «Dump» feature which allows all clips to be «dumped» at the
end of the current playlist. This allows the operator to save all
material to tape, as a backup feature after a show is complete.
You can select in the Setup menu which camera angles have to
be included in the Fill Play-List function.
If your clips are currently connected to another server on the
network, the clips from that server will be added to your current
playlist.
Make sure the playlist you have selected is an empty one. This
function will append the clips at the end of an existing playlist.
Important
In order to guarantee the validity of data and clips previously saved, it is
advised to properly exit the application by pressing ALT+ Q and ENTER
from the keyboard, or F6 and then ENTER from the Remote Panel. DO
NOT TURN OFF THE SYSTEM WHILE THE APPLICATION IS RUNNING.