EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 164)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
155
13.5 WORKING WITH MAPPED NETWORK
CAMERAS
If you have activated the Mapped Network Cameras option and defined mapped
network cameras in the Setup menu of the Remote Panel (Page 6.3), you can use
other network cameras as if there were local cameras.
The clipping on mapped cameras follows the same rule as for local cameras. Clips
created will be copied as local clips in the corresponding positions.
Two limitations must be noted in the mapped camera mode:
• All cameras are delayed so that in LIVE mode all cameras are on the same
timecode.
• Recalling local clips will not be instantly available: the network copy of the
remote cameras will occur before the clip can be recalled.