EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 38)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
29
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C --->
By pressing the D key (- - - > ), the operator has access to the D, E and F
cameras. The operation menu becomes:
Rst Cam Local Sync Prv 2nd CTRL
Cam D Cam E Cam F <---
Press the D key (< - - - ) to return to CAM A, B, C selection.
Rst Cam
This function restores the position of cameras on the active channels: CAM A on
PGM1, CAM B on PRV.
Note
When a clip/playlist is loaded on a channel, switching back to Live mode
will recall the record train, which was last used on that output. This
avoids too frequent uses of the RST CAM function.
Local
This function allows the user to reconnect to the local LSM after having accessed
distant clips or record trains. The function is highlighted when the user is
connected to both clips and record trains on the local LSM. It is displayed only on
Master/Server LSMs when they are connected to the SDTI network.
Sync Prv
This option allows the user to synchronize the PRV with the timecode and speed of
the PGM output. This function is not available with remote record trains.