EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 114)

EVS Multicam Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.C
105
Remaining Time
The remaining time in playlists containing growing clips with only an IN point
is displayed as --:--:-- on the screens (OSD, VGA, Remote Panel screen) where
this information is shown.
11.10.7 H
OW TO
D
ELETE
P
LAYLIST
E
LEMENTS FROM A
P
LAYLIST
To delete a playlist element in a playlist using the Remote Panel, proceed as
follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element
that needs to be deleted.
If the Browse mode is active, the first frame will appear on the display as
each clip is scrolled through.
2. Select Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message
will appear if that option has been enabled in the Setup menu.
11.10.8 H
OW TO
M
OVE AN
E
LEMENT
W
ITHIN A
P
LAYLIST
The action to move a playlist element is described in this section as it uses the
Delete command.
To move a playlist element within a playlist using the Remote Panel, proceed as
follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the clip that
needs to be moved.
2. Select Delete from the Playlist Edit menu. The clip is sent to the clipboard
and loaded on the PRV channel.
3. Scroll to the location in the playlist where you want to insert the clip.
Remember that the position where the clip is inserted will depend on the
value of the setting ‘Insert in Playlist’ on P4.1, F5, that is to say before or
after the selected playlist element.
4. Press TAKE or INSERT on the Remote Panel to insert the clip from the
clipboard at the requested location.
The playlist element is inserted at the requested location.
If the playlist element has been trimmed before being moved, the element will be
reinserted in the new position with the new guardbands.