EVS MulticamLSM Version 10.03 - July 2010 Operating Manual - Manual (Page 165)

Issue
10.03.C EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2010
156
14. Paint Mode
14.1 INTRODUCTION
Note
The Paint mode is a software option, which requires the license code 114
being installed. For more information on the required license key, contact
the Support or Sales team.
The Paint mode is not available on EVS servers working with 10-bit
codecs.
The functionality of this software package can be operated using the tablet and
the stylus, or a touch screen. The normal pointing device is the tablet. It is
selected in the Setup menu.
Selecting F2 (on page 6.2 of the Setup menu) will toggle between tablet / touch
screen (only when the touch screen is available). The touch screen must always
be connected to the RS422 port #6 and defined on page 7.2 of the Setup menu
(F6).
The use of the Loop function allows the operator to record the effect back into the
1
s t record channel of the server, and to create a clip with the paint feature. Rolling
a clip while in the Loop mode, in Painting, and dissolving paint image on/off allow
for a very powerful feature.