RIDGID NaviTrack II - Manual (Page 28)

NaviTrack® II
27
Specifications
Weight w/ batteries ................. 2,4 kg
Dimensions
Length ................................... 38,0 cm
Width ..................................... 18,2 cm
Height .................................... 79,0 cm
Power Source
4 C-size batteries, 1,5 V Alkaline (ANSI/NEDA 14A, IEC LR14)
or 1,2 V NiMH or NiCad rechargeable batteries
Power Rating: 6 V, 550 mA
Signal Strength
Non-linear in function. 2000 is 10x higher than 1000, 3000 is
10x higher then 2000, etc.
Operating Environment
Temperature ......................... -4°F to 122°F (-20°C to 50°C)
Humidity ................................ 5% to 95% RH
Storage Temperature .............. -4°F to 140°F (-20°C to 60°C)
Default Settings
Depth units = Feet & inches
Volume = 1 (one setting above mute)
Backlight = Auto
60 Hz (Power) Default Mode
Standard Equipment
• NaviTrack® II Locator
• Markers and Mast Holder
• Operator’s Manual
• 4 C-cell batteries (Alkaline)
• Training Video (DVD)
Optional Equipment
• Additional Pole/Sonde Markers
• ST-301 Transmitter
• ST-501 Transmitter
• Inductive Clamp (12 cm)
• Battery Sonde
• Float Sonde
Frequencies
Default Frequencies:
Sonde ........................................... 512 Hz
Active Line Trace ..................... 128 Hz, 1 kHz, 8 kHz,
33 kHz
Power Line Trace ..................... 60 Hz (9th)
Optional Frequencies:
Sonde ........................................... 16 Hz, 640 Hz, 850 Hz
8 kHz, 16 kHz, 33 kHz
Line Trace ................................... 200 kHz, 262 kHz
Power .......................................... 50 Hz