ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 79)

P-2602HWNLI User’s Guide
Chapter 4 VoIP Wizard 79
4 The ZyXEL Device attempts to register your SIP account with the SIP server.
Figure 35 SIP Registration Test
5 This screen displays if SIP account registration fails. If your DSL cable was
disconnected, you can try connecting it. Then wait a few seconds and click Register
Again. If your Internet connection was already working, you can click Back and try re-
entering your SIP account settings.
Figure 36 VoIP Wizard Fail
6 This screen displays if your SIP account registration was successful. Click Return to
Wizard Main Page if you want to use another configuration wizard. Click Go to
Advanced Setup page or Finish to close the wizard and go to the main web configurator
screens.
Password Type the password associated with the user name above. You can use up
to 95 ASCII Extended set characters.
Check here to set up SIP2
settings.
This screen configures SIP account 1. Select the check box if you have
a second SIP account that you want to use. You will need to configure the
same fields for the second SIP account.
Back Click Back to return to the previous screen.
Apply Click Apply to complete the wizard setup and save your configuration.
Exit Click Exit to close the wizard without saving your settings.
Table 16 VOIP Wizard Configuration
LABEL DESCRIPTION