ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 180)

P-2602HWNLI User’s Guide
180 Chapter 11 Voice
Figure 95 Phone > Analog Phone
Each field is described in the following table.
Table 61 Phone > Analog Phone
LABEL DESCRIPTION
Phone Port
Settings
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Outgoing Call Use
SIP1 Select this if you want this phone port to use the SIP1 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first.
SIP2 Select this if you want this phone port to use the SIP2 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first.
Incoming Call
apply to
SIP1 Select this if you want to receive phone calls for the SIP1 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
SIP2 Select this if you want to receive phone calls for the SIP2 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
PSTN Line Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Note: When the ZyXEL Device does not have power, regardless of
the settings you configure, only the phone connected to the
PHONE 1 port can be used for making calls. Ensure you
know which phone this is, so that in case of emergency you
can make outgoing calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.