ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 332)

P-2602HWNLI User’s Guide
332 Chapter 24 Logs
Table 141 RTP Logs
LOG MESSAGE DESCRIPTION
Error, RTP init fail The initialization of an RTP session failed.
Error, Call fail: RTP
connect fail A VoIP phone call failed because the RTP session could not be
established.
Error, RTP connection
cannot close The termination of an RTP session failed.
Table 142 FSM Logs: Caller Side
LOG MESSAGE DESCRIPTION
VoIP Call Start Ph[Phone
Port Number] <- Outgoing
Call Number Someone used a phone connected to the listed phone port to
initiate a VoIP call to the listed destination.
VoIP Call Established
Ph[Phone Port] -> Outgoing
Call Number Someone used a phone connected to the listed phone port to
make a VoIP call to the listed destination.
VoIP Call End Phone[Phone
Port] A VoIP phone call made from a phone connected to the listed
phone port has terminated.
Table 143 FSM Logs: Callee Side
LOG MESSAGE DESCRIPTION
VoIP Call Start from
SIP[SIP Port Number] A VoIP phone call came to the ZyXEL Device from the listed SIP
number.
VoIP Call Established
Ph[Phone Port] <- Outgoing
Call Number A VoIP phone call was set up from the listed SIP number to the
ZyXEL Device.
VoIP Call End Phone[Phone
Port] A VoIP phone call that came into the ZyXEL Device has
terminated.