ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 144)

P-2602HWNLI User’s Guide
144 Chapter 9 Wireless LAN
Figure 72 Example Wireless Client OTIST Screen
9.5.2 Starting OTIST
Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to transfer.
You can use the key in this screen to set up WPA-PSK encryption manually for non-
OTIST devices in the wireless network. After reviewing the settings, click OK.
Figure 73 Security Key
2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.
3 In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the
same Setup key). Click OK to go back to the ZyXEL utility main screen.
Figure 74 OTIST in Progress (AP) Figure 75 OTIST in Progress (Client)