3 reset to factory defaults – ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI User Manual
Page 339
P-2602HWNLI User’s Guide
Chapter 25 Tools
339
Figure 184 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
for details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 185 Configuration Upload Error
25.5.3 Reset to Factory Defaults
Clicking the Reset button in this section clears all user-entered configuration information and
returns the ZyXEL Device to its factory defaults as shown on the screen. The following
warning screen will appear.
Figure 186 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to
for more information on the RESET button.