Figure 142 static route, Table 100 static route – ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI User Manual
Page 270

P-2602HWNLI User’s Guide
270
Chapter 18 Static Route
Figure 142 Static Route
The following table describes the labels in this screen.
Table 100 Static Route
LABEL
DESCRIPTION
#
This is the number of an individual static route.
Active
This field shows whether this static route is active (Yes) or not (No).
Name
This is the name that describes or identifies this route.
Destination
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Modify
Click the edit icon to go to the screen where you can set up a static route on the
ZyXEL Device.
Click the delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.
Apply
Click Apply to save your changes to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.