ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI - Manual (Page 432)

P-2602HWNLI User’s Guide
432 Appendix I Commands
WAN Call Schedules
Call scheduling (applicable for PPPoA or PPPoE encapsulation only) allows you to dictate
when a remote node should be called and for how long.
actnomatch [type 0-2
= checknext | forward
| drop]
Set the action for packets that do not match the filter rule.
offset [#] Set offset for the generic rule. Type the starting byte of the
data portion in the packet that you want to compare. The range
for this field is from 0 to 255.
length [#] Set the length for generic rule. Type the byte count of the data
portion in the packet that you want to compare. The range for
this field is 0 to 8.
mask [#] Set the mask for generic rule. Type the mask (in Hexadecimal)
to apply to the data portion before comparison.
value [(depend on
length in hex)]
Set the value for generic rule. Type the value (in Hexadecimal)
to compare with the data portion.
clear Clear the current filter set.
save Save the filter set parameters.
display [set#][rule#] Display filter set information. W/o any parameters, this
displays buffer information.
freememory Discard changes.
lan filter
[incoming|outgoing]
[tcpip|generic] [set#1]
[set#2] [set#3] [set#4]
Set LAN filter to be incoming/outgoing or protocol /device and
the filter set could be 1-12, 0 means empty. Example: Lan filter
incoming tcpip 1 0 0 0
wan node filter
[incoming|outgoing]
[tcpip|generic] [set #1]
[set #2] [set #3] [set
#4]
Set WAN filter, incoming or outgoing can be specified, and
filter set can be 1-12, value 0 means empty.
Table 189 Filter Commands
COMMAND DESCRIPTION
Table 190 WAN Call Schedules
COMMAND DESCRIPTION
wan callsch index [set#] Set the call schedule index #. You must apply this command
first before you begin to configure a call schedule.
name [set name] Set the schedule name.
active [Yes | No] Enable/Disable the schedule.
startday [year]
[month] [day]
Set the schedule start day.
onceday [year]
[month] [day]
Set the schedule to be used one time.
weeklyday Sunday
[1:active|0:inactive]
Set the schedule to recur weekly on Sundays.