3 configure a static vlan – ZyXEL Communications ES-2108 Series User Manual
Page 91
Chapter 8 VLAN
ES-2108 Series User’s Guide
91
The following table describes the labels in this screen.
8.5.3 Configure a Static VLAN
Use this screen to configure and view 802.1Q VLAN parameters for the Switch. See
for more information on static VLAN. To configure a static VLAN, click
Static VLAN in the VLAN Status screen to display the screen as shown next.
Figure 43 Advanced Application > VLAN > Static VLAN
Table 16 Advanced Application > VLAN > VLAN Details
LABEL
DESCRIPTION
VLAN Status
Click this to go to the VLAN Status screen.
VID
This is the VLAN identification number that was configured in the Static VLAN
screen.
Port Number
This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as “–“.
Elapsed Time
This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
Status
This field shows how this VLAN was added to the Switch; dynamic - using GVRP,
static - added as a permanent entry or it shows other - added using Multicast VLAN
Registration (MVR).