ZyXEL Communications ES-2108 Series - Manual (Page 202)

Chapter 26 Maintenance
ES-2108 Series User’s Guide
202
Switch to your computer and renames it to “config.cfg”. See Table 74 on page 201 for
more information on filename conventions.
7 Enter quit to exit the ftp prompt.
26.8.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
26.8.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Access Control screen.
• The IP address(es) in the Secured Client Set in the Remote Management screen does not
match the client IP address. If it does not match, the Switch will disallow the session.
Table 75 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server
for anonymous access. Anonymous logins will work only if your ISP or
service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Initial Remote
Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).