ZyXEL Communications ES-2108 Series - Manual (Page 212)

Chapter 27 Access Control
ES-2108 Series User’s Guide
212
"
It is highly recommended that you change the default administrator password
(1234).
• A non-administrator (username is something other than admin) is someone who can view
but not configure Switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.
Figure 125 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 86 Management > Access Control > Logins
LABEL DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password Type the existing system password (1234 is the default password when
shipped).
New Password Enter your new system password.
Retype to confirm Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These people have read-only access.
User Name Set a user name (up to 30 characters long).
Password Enter your new system password.
Retype to confirm Retype your new system password for confirmation