ZyXEL Communications ES-2108 Series - Manual (Page 59)

Chapter 4 The Web Configurator
ES-2108 Series User’s Guide
59
Figure 23 Resetting the Switch: Via the Console Port (ES-2108-G)
The Switch is now re initialized with the factory-default configuration file including the
default password of “1234”.
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session both for
security reasons and so as you don’t lock out other administrators.
Figure 24 Web Configurator: Logout Screen
4.8 Help
The web configurator’s online help has descriptions of individual screens and some
supplementary information.
Click the Help link from a web configurator screen to view an online help description of that
screen.
Bootbase Version: V1.01 | 09/02/2005 14:00:16
RAM: Size = 32768 Kbytes
DRAM POST: Testing: 32768K
OK
FLASH: AMD 32M *1
ZyNOS Version: V3.80(ABL.0)b2 | 05/28/2007 20:18:03
Press any key to enter debug mode within 3 seconds.
...............
Enter Debug Mode
ras> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCC
Total 49152 bytes received.
Erasing......
............
OK
ras> atgo