ZyXEL Communications ES-2108 Series - Manual (Page 208)

Chapter 27 Access Control
ES-2108 Series User’s Guide
208
27.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
traceroute traceRoutePathChange 1.3.6.1.2.1.81.0.1 This trap is sent when a traceroute path
changes.
traceRouteTestFailed 1.3.6.1.2.1.81.0.2 This trap is sent when a traceroute test
fails.
traceRouteTestCompleted 1.3.6.1.2.1.81.0.3 This trap is sent when a traceroute test is
completed.
Table 82 SNMP IP Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
Table 83 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root
switch changes.
MRSTPNewRoot 1.3.6.1.4.1.890.1.5.8.xx.43.2.1 This trap is sent when the MRSTP
root switch changes.
MSTPNewRoot 1.3.6.1.4.1.890.1.5.8.xx.107.7
0.1 This trap is sent when the MSTP
root switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MRSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.xx.43.2.2 This trap is sent when the MRSTP
topology changes.
MSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.xx.107.7
0.2 This trap is sent when the MSTP
root switch changes.
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.xx.31.2.1 This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.xx.31.2.2 This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.15 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16 This trap is sent when the variable
falls below the RMON "falling"
threshold.