1 link aggregation id, 3 link aggregation control protocol status, Table 32 link aggregation id: local switch – ZyXEL Communications ES-2108 Series User Manual
Page 122: Table 33 link aggregation id: peer switch
Chapter 15 Link Aggregation
ES-2108 Series User’s Guide
122
15.2.1 Link Aggregation ID
LACP aggregation ID consists of the following information
1
:
15.3 Link Aggregation Control Protocol Status
Click Advanced Application > Link Aggregation in the navigation panel. The Link
Aggregation Control Protocol Status screen displays by default. See
for more information.
Figure 62 Advanced Application > Link Aggregation: Status
The following table describes the labels in this screen.
Table 32 Link Aggregation ID: Local
Switch
SYSTEM
PRIORITY
MAC ADDRESS
KEY
PORT PRIORITY
PORT NUMBER
0000
00-00-00-00-00-00
0000
00
0000
Table 33 Link Aggregation ID: Peer Switch
SYSTEM PRIORITY MAC ADDRESS
KEY
PORT PRIORITY
PORT NUMBER
0000
00-00-00-00-00-00
0000
00
0000
1.
Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
Table 34 Advanced Application > Link Aggregation: Status
LABEL
DESCRIPTION
Index
This field displays the trunk ID to identify a trunk group, that is, one logical link
containing multiple ports.
Enabled Ports
These are the ports you have configured in the Link Aggregation screen to be in the
trunk group.
Synchronized
Ports
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Aggregator ID
Link Aggregator ID consists of system priority, MAC address, key, port priority and
port number. Refer to
for more information on this field.
Status
This field displays how these ports were added to the trunk group. It displays:
•
Static - if the ports are configured as static members of a trunk group.
•
LACP - if the ports are configured to join a trunk group via LACP.