ZyXEL Communications ES-2108 Series - Manual (Page 133)

Chapter 17 Port Security
ES-2108 Series User’s Guide
133
17.3 Port Security Example
The following example demonstrates the various settings and results associated with different
port security configurations. Ports 1 to 5 are configured to:
• Port 1 - Forward all packets and learn all MAC addresses.
• Port 2 - Forward all packets and learn all MAC addresses.
• Port 3 - Drop all packets from unknown MAC addresses and do not learn MAC addresses.
• Port 4 - Drop all packets from unknown MAC addresses and do not learn MAC addresses.
• Port 5 - Drop all packets from unknown MAC addresses but forward packets from up to
100 learned MAC addresses.
Figure 71 Port Security Example
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 38 Advanced Application > Port Security (continued)
LABEL DESCRIPTION