Figure 157 masonry plug and m4 tap screw, Table 104 firmware specifications – ZyXEL Communications ES-2108 Series User Manual
Page 251

Appendix A Product Specifications
ES-2108 Series User’s Guide
251
Figure 157 Masonry Plug and M4 Tap Screw
Table 104 Firmware Specifications
FEATURE
DESCRIPTION
Default IP Address
192.168.1.1
Default Subnet Mask
255.255.255.0 (24 bits)
Administrator User Name
admin
Default Password
1234
Number of Login Accounts
Configurable on the Switch
4 management accounts configured on the Switch.
Authentication via RADIUS and TACACS+ is also available.
VLAN
A VLAN (Virtual Local Area Network) allows a physical network to be
partitioned into multiple logical networks. Devices on a logical network
belong to one group. A device can belong to more than one group. With
VLAN, a device cannot directly talk to or hear from devices that are not in
the same group(s); the traffic must first go through a router.
MAC Address Filter
Filter traffic based on the source and/or destination MAC address and
VLAN group (ID).
DHCP Client
DHCP (Dynamic Host Configuration Protocol RFC 2131 and RFC 2132)
allows individual computers to obtain TCP/IP configuration at start-up
from a server. You can configure the Switch as a DHCP client to obtain
TCP/IP information (such as the IP address and subnet mask) from a
DHCP server. If you disable the DHCP service, you must manually enter
the TCP/IP information.
DHCP Relay
Use this feature to have the relay DHCP requests to DHCP servers on
your network.
IGMP Snooping
The Switch supports IGMP snooping enabling group multicast traffic to
be only forwarded to ports that are members of that group; thus allowing
you to significantly reduce multicast traffic passing through your Switch.