beautypg.com

ZyXEL Communications ES-2108 Series User Manual

Page 232

background image

Chapter 30 Cluster Management

ES-2108 Series User’s Guide

232

List

A list of suitable candidates found by auto-discovery is shown here. The
switches must be directly connected. Directly connected switches that are set to
be cluster managers will not be visible in the Clustering Candidate list.
Switches that are not in the same management VLAN group will not be visible in
the Clustering Candidate list.

Password

Each cluster member’s password is its web configurator password. Select a
member in the Clustering Candidate list and then enter its web configurator
password. If that switch administrator changes the web configurator password
afterwards, then it cannot be managed from the Cluster Manager. Its Status is
displayed as Error in the Cluster Management Status screen and a warning
icon (

) appears in the member summary list below.

If multiple devices have the same password then hold [SHIFT] and click those
switches to select them. Then enter their common web configurator password.

Add

Click Add to save your settings to the Switch’s run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.

Cancel

Click Cancel to begin configuring this part of the screen afresh.

Refresh

Click Refresh to perform auto-discovery again to list potential cluster members.

The next summary table shows the information for the clustering members configured.

Index

This is the index number of a cluster member switch.

MacAddr

This is the cluster member switch’s hardware MAC address.

Name

This is the cluster member switch’s System Name.

Model

This is the cluster member switch’s model name.

Remove

Select this checkbox and then click the Remove button to remove a cluster
member switch from the cluster.

Cancel

Click Cancel to begin configuring this part of the screen afresh.

Table 96 Management > Cluster Management > Configuration (continued)

LABEL

DESCRIPTION