ZyXEL Communications 1 - Manual (Page 98)

NetAtlas Enterprise 1.00 User’s Guide
97 Chapter 10 System Configuration
Figure 73 Configuration: System Configuration: Time Setup
Table 30 Configuration: System Configuration: Time Setup
LABEL DESCRIPTION
Use Time Server When Select the time service protocol that your time server sends when you start
the EMS. Not all time servers support all protocols, so you may have to
check with your ISP/network administrator or use trial and error to find a
protocol that works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None is the default; enter the time manually.
Time Server IP Address Enter the IP address or domain name of your time server. Check with your
ISP/network administrator if you are unsure of this information.
Current Time This field displays an updated time only when you reenter this menu.
New Time (hh:mm:ss) Enter the new time in hour, minute and second format.
Current Date This field displays an updated date only when you re-enter this menu.
New Date (yyyy:mm:dd) Enter the new date in year, month and day format.
Time Zone Select the time difference between your time zone and Universal Time
Coordinate (UTC) formerly known as Greenwich Mean Time (GMT).
Apply Click Apply to save the changes.
The following table describes the labels in this screen.