ZyXEL Communications 1 - Manual (Page 51)

NetAtlas Enterprise 1.00 User’s Guide
Chapter 2 EMS Main Window 50
2.10 Configuration Save
You can save the current configuration of the switch(es).
Note: Do not turn off the switch during the updating process, as it may corrupt the
firmware and make your switch unusable.
1 To save the current switch configuration, right-click on the switch icon in the Device List
Panel.
2 Click Configuration Save.
3 Choose a switch from the list located in the screen.
4 Click Apply to save the current configuration.
5 All settings configured on the EMS will be saved to the selected switch.
Figure 40 Configuration: Save
Apply Click Apply to save the changes back to the switch.
Close Click Close to close the screen.
Table 10 Configuration: Switch System Configuration (continued)
LABEL DESCRIPTION