ZyXEL Communications 1 - Manual (Page 132)

NetAtlas Enterprise 1.00 User’s Guide
131 Chapter 13 Ethernet Port Configuration
4 Click Configuration, Ethernet Port Configuration and then the Broadcast Storm
Ctrl. tab.
5 Select the ports from the Port List Panel that you want to apply this configuration.
Figure 94 Configuration: Ethernet Port Configuration: Broadcast Storm Ctrl.
The following table describes the fields in this screen.
Table 53 Configuration: Ethernet Port Configuration: Broadcast Storm Ctrl.
LABEL DESCRIPTION
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port
receives per second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives
per second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF)
packets the port receives per second.
Apply Click Apply to save the changes back to the switch.
13.7 Queue Method
Queuing is used to help solve performance degradation when there is network congestion. Use
the following screen to configure queuing algorithms for outgoing traffic.
13.7.1 Configuring Queue Method
Follow the steps below to configure the Queue Method screen.
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration and then the Switch Setup tab.
3 Select a Queuing Method from the drop-down list box and then click Apply.
4 Click Configuration, Ethernet Port Configuration and then the Queue Method tab.