ZyXEL Communications 1 - Manual (Page 70)

NetAtlas Enterprise 1.00 User’s Guide
69 Chapter 5 Status
1 Click Status and then 802.1d.
2 To view the MAC table of a switch choose a switch from the list located on the left-hand
side of the screen and click the MAC Table tab.
Figure 52 Status: 802.1d: MAC Table
The following table describes the labels in this screen.
Table 19 Status: 802.1d: MAC Table
LABEL DESCRIPTION
Sort by Click one of the following buttons to display and arrange the data according to that
button type. The information is then displayed in the summary table below.
MAC Click this button to display and arrange the data according to MAC address.
VID Click this button to display and arrange the data according to VLAN group.
Port Click this button to display and arrange the data according to port number.
Index This is the incoming frame index number.
Name This field displays a descriptive name for this static MAC address forwarding rule.
MAC Address This is the MAC address of the device from which this incoming frame came.
VID This is the VLAN group to which this frame belongs.
Port This is the port from which the above MAC address was learned.
Type This shows whether the MAC address is dynamic (learned by the switch) or static
(manually entered in Static MAC Forwarding).
Polling The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking the Apply button.
Close Click Close to close the screen.