1 port list multiple port configuration, Figure 66 configuration window panels, Table 25 configuration window panels – ZyXEL Communications 1 User Manual
Page 89
NetAtlas Enterprise 1.00 User’s Guide
Chapter 9 Device Menu Overview
88
Figure 66
Device Panel
Port List
Switch Configurator
Panel
Panel
Configuration Window Panels
Table 25 Configuration Window Panels
LABEL
DESCRIPTION
Device Panel
This panel displays all active devices currently managed by the EMS.
Port List Panel
This field displays a list of switch ports. This list displays in the Ethernet
Port Configuration screens only.
To make configuration changes to each port or ports select a port number
or multiple port numbers (by pressing the [CTRL] key and clicking at the
same time) in the Port List Panel.
Copy to..
Click the Copy to.. button to copy the configuration from the switch that
you are currently configuring to one or more switches. Port configurations
can also be copied to other device ports in the Ethernet Port
Configuration screens.
Switch Configurator
Use this panel to make configuration changes to a device based on a port
or multiple ports selected in the Port List Panel.
If the screen does not have a Port List Panel, then use this panel to make
configuration changes to a device selected in the Device Panel.
Apply
Click Apply to save configuration changes to the switch.
Close
Click Close to close a configuration screen. If you close a screen without
first clicking Apply, configuration changes will not be saved.
The following table describes the elements in this screen.
9.3.1 Port List Multiple Port Configuration
Configure more than one port at the same time by pressing the [CTRL] key and clicking at the
same time in the Port List Panel. Click Apply when you are satisfied with the configuration
changes.
The following example screen displays.