ZyXEL Communications 1 - Manual (Page 54)

NetAtlas Enterprise 1.00 User’s Guide
53 Chapter 3 Managing Device Maps in EMS
Figure 42 Map: Add Submap/Device
The following table describes the labels in this screen.
Table 11 Map: Add Submap/Device
LABEL DESCRIPTION
Properties Select the Submap or Device radio button to add a new submap or device
icon to the Device List Panel.
If you select Submap, only the Name and Description fields display ; all other
fields appear as read-only.
Name Enter a descriptive name (up to 32 characters) for this node for identification
purposes.
IP Address Enter the IP address of the device.
Password Enter a password (up to 32 characters). This password is used by the EMS
administrator for device firmware upload.
Description Enter a description (up to 32 characters) about the device.
Get Community Enter the get community, which is the password for the incoming Get- and
GetNext- requests from the management station.
Set Community Enter the set community, which is the password for incoming Set- requests
from the management station.
Trap Community Enter the trap community, which is the password sent with each trap to the
SNMP manager.
OK Click OK to save the changes and close the screen.
Cancel Click Cancel to discard the changes and close the screen.
3.1.2 Edit a Node
Select a submap icon in the Device List Panel and then click Map and Edit Node.