7 common ems command buttons, 8 view the switch, 9 switch information – ZyXEL Communications 1 User Manual
Page 49: Figure 38 switch view, Table 9 common ems command buttons

NetAtlas Enterprise 1.00 User’s Guide
Chapter 2 EMS Main Window
48
2.7 Common EMS Command Buttons
The following table shows common command buttons found on most EMS screens.
Table 9 Common EMS Command Buttons
LABEL
DESCRIPTION
Apply
Click Apply to save the changes back to the switch.
OK
Click OK to save your changes and close the screen.
Cancel
Click Cancel to discard all changes and close the screen.
Close
Click Close to close the screen.
2.8 View the Switch
To display a selected switch, double-click the apporopriate switch in the Device List Panel or
on the switch icon in the Device Panel. You can only display one switch in the device Panel
window at a time. Refer to the appropriate chapters or sections for the descriptions of each
menu screen.
Figure 38 Switch View
2.9 Switch Information
Follow the steps to display information on a switch.
1 Right-click on the switch icon in the Device List Panel.
2 Click Configuration, System and then System Info. The switch information window
displays as shown next.
Telnet
This link takes you to a screen where you can access a device Telnet
service.
Web Access
This link takes you to a screen where you can access a device Web
configurator.
Ping
This link takes you to a screen where you can ping a device directly
through the EMS.
Table 8 EMS Navigation Panel Sub-link Descriptions (continued)
DESCRIPTION
LABEL