ZyXEL Communications 1 - Manual (Page 113)

NetAtlas Enterprise 1.00 User’s Guide
Chapter 11 Switch Configuration 112
Figure 82 Configuration: Switch Configuration: MAC Forwarding: Add
The following table describes the labels in this screen..
Table 41 Configuration: Switch Configuration: MAC Forwarding: Add
LABEL DESCRIPTION
Active Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
MAC Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs. Static MAC addresses do not age out.
VID Enter the VLAN group identification number.
Port Select a port where the MAC address entered in the previous field will be
automatically forwarded.
OK Click OK to save the new rule to the switch. It then displays in the summary table at
the bottom of the screen.
Close Click Close to close the screen.
11.11 Filtering
This chapter discusses MAC address port filtering.
11.11.1 Introduction to Filtering
Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).
11.11.2 Configuring Filtering
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, Switch Configuration and then the Filtering tab to display the
following screen.