6 finding your switch, 1 device auto-discovery – ZyXEL Communications 1 User Manual
Page 35
NetAtlas Enterprise 1.00 User’s Guide
Chapter 1 Introducing the EMS
34
Figure 22 Compile Mibs
6 Repeat Steps 2 to 5 for the following;
•
rfc2925.mib (DISMAN-PING-MIB)
•
rfc3291.mib (INET-ADRESS-MIB)
•
rfc3621.mib (POWER-ETHERNET-MIB)
•
zyxel.mib
•
zyxel-es3124.mib
•
zyxel-es3124pwr.mib.
Note: You must add and compile the MIBs separately in the order specified.
7 Finally click Done in the Compile Mibs screen.
1.6 Finding your Switch
The SNMPc Network Manager can find new devices automatically using auto-discovery
(enabled by default) or you will have to add device(s) manually.
1.6.1 Device Auto-Discovery
1 To enable auto-discovery and then find your device, click Config, Discovery/Polling.
Figure 23 Config, Discovery Agents
2 Select the Enable Discovery check box and click OK.