ZyXEL Communications 1 - Manual (Page 97)

NetAtlas Enterprise 1.00 User’s Guide
Chapter 10 System Configuration 96
10.4 Time Setup
The EMS keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server when you log in to the EMS.
Use the Time Setup screen to update the time and date settings of the EMS. The real time is
then displayed in the system messages.
10.4.1 Configuring Time Setup
Follow the steps below to configure your system time.
1 In the Device Panel list, select a device and then right-click.
2 Click Configuration, System Configuration and then the Time Setup tab.
Telnet, FTP, HTTP,
ICMP, SNMP, ICMP,
SSH, HTTPS
Select the checkbox to allow the trusted computer(s) in the IP address range
specified above to use this service to manage the switch.
Apply Click Apply to save the changes back to the switch.
Table 29 Configuration: System Configuration: Remote Management (continued)
LABEL DESCRIPTION