Enabling static nat, 6 enabling static nat – Westell Technologies Westell LiteLine 6110 User Manual
Page 94
030-300233 Rev. A
94
May 2006
Westell (Models 6000, 6100, 6110)
User Guide
13.6 Enabling Static NAT
Before you enable static NAT, select Default from the Current Profile drop-down menu. Static NAT must be configured
for the Router’s default profile. After you select the default profile, click the static NAT button in the Service
Configuration screen.
NOTE: In the following screen, the default account profile is labeled Default. However, if you have renamed the default
account profile, you must select the profile name that you created as the default profile.
If you clicked the static NAT button, the following screen will be displayed. Select a device name from the Static NAT
Device drop-down menu, and then click enable in the Static NAT screen. This will automatically enable the Static NAT
feature for that device.