Create a new location, Name the new location, Select the ethernet configuration – Westell Technologies Westell LiteLine 6110 User Manual
Page 37: 3 create a new location, 4 name the new location, 5 select the ethernet configuration
030-300233 Rev. A
37
May 2006
Westell (Models 6000, 6100, 6110)
User Guide
8.3 Create a New Location
After selecting the Network icon at the System Preferences screen, the Network screen will be displayed. Select
New Location from the Location field.
8.4 Name the New Location
After selecting New Location from the Network screen, the following screen will be displayed. In the field labeled
Name your new location:, change the text from “Untitled” to “Westell.” Click on OK.
8.5 Select the Ethernet Configuration
After clicking on OK in the previous step, the Network screen will be displayed. The Network screen shows the
settings for the newly created location. From the Configure field in the Network screen, select Built-in Ethernet.
Click on Save.
NOTE: Default settings for the Built-in Ethernet configuration are sufficient to operate the Modem.