Westell Technologies Westell LiteLine 6110 - Manual (Page 31)

030-300233 Rev. A 31 May 2006
Westell (Models 6000, 6100, 6110) User Guide
Enter the VPI and VCI values that you obtained from your Internet service provider. Click next to continue.
Select the Protocol type that you obtained from your Internet Service Provider. Click next to continue.
When the SET-UP COMPLETE screen appears, you have successfully completed your Account Profile setup.
Click done.
NOTE: Depending on your Internet Service
Provider, the VPI/VCI screen may come
pre-configured and it will be displayed here.
In this case, you should not change any
values in this screen. Click next to go to the
PROTOCOL screen.
NOTE: Depending on your Internet Service
Provider, the PROTOCOL screen may
come pre-configured and it will be displayed
here. In this case, you will need to click next
to go to the SET-UP COMPLETE screen.