Led indicators, Appendix b-hardware features, 1 led indicators – Westell Technologies Westell LiteLine 6110 User Manual
Page 134
030-300233 Rev. A
134
May 2006
User Guide
Westell Models (6000, 6100,6110)
19. APPENDIX B-HARDWARE FEATURES
19.1 LED
Indicators
This section explains the LED States and Descriptions. LED indicators are used to verify the unit’s operation and
status.
LED States and Descriptions (Model 6000)
LED State
Description
Solid Green
Power ON
POWER
No Light
No Power
Slow Flashing Green
Power ON and passed power-up diagnostics
(1 flash/sec)
Moderate Flashing Green
Power ON and attempting synchronization
(2 flashes/sec)
Steady Green
Power ON and synchronized with ADSL line card
Steady Red (less than 20 sec.)
Hardware power-up in process
Blinking Red
Modem failed power-up diagnostics
Solid Amber
Modem is in safe boot mode
READY
No Light
No Power
Solid Green
10/100 Base-T link established
LINK
No Light
No 10/100 Base-T link established
Pulsing Green
Data being transmitted or received. Pulses should match the
reception or transmission of Ethernet data
ACTIVITY
No Light
No data on Ethernet interface
LED States and Descriptions (Models 6100, 6110)
LED State
Description
Solid Green
Power ON
POWER
No Light
No Power
Slow Flashing Green
Power ON and waiting for carrier detect signal
(1 flash/sec)
Moderate Flashing Green
Power ON and attempting synchronization
(2 flashes/sec)
Steady Green
Power ON and synchronized with ADSL line card
Steady Red (less than 20 sec.)
Hardware power-up in process
Blinking Red
Modem failed self-diagnostics
Solid Amber
Modem is in safe boot mode
DSL
No Light
No Power
Solid Green
Ethernet link established
Flashing Green
Transmit or Receive Activity
ETHERNET
No Light
No link established
Solid Green
USB link established
Flashing Green
Transmit or Receive Activity
USB
No Light
No USB link established