1 enabling single static ip configuration – Westell Technologies Westell LiteLine 6110 User Manual
Page 70
030-300233 Rev. A
70
May 2006
Westell (Models 6000, 6100, 6110)
User Guide
12.7.1 Enabling Single Static IP Configuration
To enable Single Static IP, click the device (from the options listed in the window) that will share your Single Static
IP. Click on enable.
NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your
Single Static IP.
If you clicked on enable, the following pop-up screen will appear. Click on OK to enable this device for Single Static
IP. Click on Cancel if you do not want to enable Single Static IP.
NOTE: The actual information displayed in this screen may vary.
If you clicked on OK in the preceding pop-up screen, the following pop-up screen will appear. The Router must be
reset in order for the new configuration to take effect. Click on OK.