Westell Technologies Westell LiteLine 6110 - Manual (Page 89)

030-300233 Rev. A 89 May 2006
Westell (Models 6000, 6100, 6110) User Guide
13. SETTING UP ADVANCED SERVICE CONFIGURATION
You can set up additional Service Configuration options for your NAT Router that allow you to enter the port
forwarding and trigger ports ranges of your choice. Select Configuration > Service Configuration from the main
menu; the Service Configuration screen will appear.
At the Service Configuration screen, click define custom service. The Custom Service screen will guide you
through the steps of creating advanced NAT services via port forwarding and trigger port configuration.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please reset your Router via the external hardware reset button or via the procedure defined in section 14,
“Maintenance” in Backup/Restore.
Port Forwarding Ranges of Ports
This option allows you to forward a range of WAN ports to an IP address on
the LAN.
Trigger Ports This option allows you to forward a range of ports to an IP address on the
LAN only after specific outbound traffic.