Westell Technologies Westell LiteLine 6110 User Manual
Page 72
030-300233 Rev. A
72
May 2006
Westell (Models 6000, 6100, 6110)
User Guide
If you clicked on disable in the preceding screen, the following pop-up screen will be displayed. Click on OK.
If you clicked on OK in the Disable IP Passthrough? screen, the following the message will be displayed in the
pop-up screen:
Warning: Since your PC was previously configured for IP Passthrough, the modem
will automatically reboot. After the reboot, you may need to release and renew your
IP address to communicate with the modem.
Click OK in the pop-up screen to continue.
IMPORTANT: After you enable Single Static IP, you should reboot your computer to release/renew the IP address.
If you clicked on OK in the preceding screen, the following screen will be displayed. The Router will be reset and the
new configuration will take effect. After the Router has been reset, confirm that you have a DSL sync and that your
PPP session displays UP.